7 of The Best Jack Stands Reviews (Safety and Quality Required)
Jack stands are a critical part of every car enthusiast’s tool kit.
Jack stands provide a safe, fixed support so that raised vehicles can rest on when the jack has done its part.
They are designed to provide a level of safety that would not be present if the car was resting on the jack alone.
No one wants to be the victim crushed under a four-thousand-pound hunk of steel. Many people have become trapped beneath their vehicles while performing changes or repairs. While some were able to lift the car themselves or call for help, others weren’t so lucky.
Our List of the 7 Best Jack Stands
(Full Jack Stand Reviews Below)
Below is a review of seven of the best jack stands I’d like to recommend to help you stay safe while working on your car.
Related: Top Rated Floor Jacks
How Do I Choose the Stand Meant for Me?
There are a wide variety of jack stands available for purchase today.
The type that you choose will depend on the weight of the vehicle you’re working on and the amount you are willing to spend.
For example, if you have a Honda Civic weighing 2,700 pounds, you can get by with a set of two-ton jack stands.
However, if you plan on doing repairs on an F-450 with a curb weight of 8,600 pounds, you will want to use a pair of six-ton jack stands.
When you’re working under your vehicle, you will want to ensure that you have plenty of space to move your arms. Before you make your purchase, consider the weight of your vehicle and the repairs/modifications you are planning to make.
Always use a jack stand rated above the weight of your vehicle.
Related: How To Change Brakes and Rotor
The Best Jack Stand Reviews
The Torin T43002 jack stands are made of heavy-duty steel to meet or exceed ANSI requirements. The welded steel construction ensures that these stands will provide you with the stability you need when working on your vehicle.
The single-piece ratchet bar provides the strength and durability needed to support the weight of your vehicle while you are under it. Any needed adjustments can be made with the quick-adjustment mechanism.
The lift range for these jack stands is listed as 11.22 inches to 16.5 inches. You can safely leave your car on these stands for the duration of your project as long as you have a place where vandals won’t wreak havoc with it.
Be sure to follow the manufacturer’s directions for proper jacking points to prevent damage to your car.
When purchasing your jack stands, be sure to double-check all components before you start using them. If you notice bad welds or rusty parts, return them. You don’t want the stand to fail while you are working under your car. Keep in mind that these stands are large enough for midsize SUVs. If you’re looking to work underneath a tall SUV, you will need to consider a different size.
The double-locking jack stands by Torin are made with a ductile iron rack for strength and durability. The solid steel handle provides ample space for maneuvering the jack. The large frame enables the jack to safely handle its rated load without difficulty.
These jack stands have a range from 11 inches to 16.5 inches at their highest. Each jack stand is rated for 3,000 pounds for a combined total rating of 6,000 pounds, or three tons. The double-locking mechanism provides an additional layer of safety when using these jack stands.
As with any product you will be trusting your safety to, be sure to check the welds and moving parts to ensure that there are no faults.
While the welds for these jack stands may appear a little sloppy, they will support their intended weight. However, if you intend to use them for a large truck or SUV, you might want to invest in a sturdier set.
Those who feel a certain apprehension about easing under a couple thousand pounds of automotive steel can feel better about using these double-locking stands by Torin.
You might notice chipped paint or similar flaws in the metal. These marks do not in any way detract from the strength of the metal itself and are perfectly acceptable.
For a heavy-duty job, consider the three-ton jack stand set by Performance Tool. These bright-yellow jack stands are rated for 6,000 pounds combined and have a lift range of 12 inches to 17.25 inches. These stands are excellent for cars and light-duty trucks and are by no means lightweight. They are very substantial, though not so heavy that you will break your arm while positioning them underneath your vehicle.
These Performance Tool stands are extremely high, even at the lowest setting. Therefore, you might not want to use them for small cars, as your jack may not get the car high enough to slide the stands under it. They are tough and sturdy and will last the serious DIYer a lifetime.
When you make your purchase, be sure that the jack stands sit level on the floor before you use them. If they seem off center, consider purchasing a replacement. Don’t be alarmed if these stands reach your home in a thin cardboard box. For their weight and size, these jack stands are a very good deal.
The welds for this product are sturdy and substantial. They can hold up the weight for which they are rated with no problem at all. If you want something for a large truck or a bus, these jack stands are the perfect choice.
Related: The Best All Season Tires
The Powerbuilt All-in-One bottle jack comes equipped with a single jack stand for the user’s convenience. Bottle-jacks are often rated for heavier weights than floor jacks at the same price. Compared to floor jacks, however, bottle jacks tend to be unsteady due to their smaller footprint.
Be sure to use the bottle jack on a strong, flat surface such as a concrete garage floor or asphalt.
The safety bar included with this jack stand helps ensure that it remains at the necessary height to safely complete the job. Those who own SUVs and off-road vehicles will find this jack/jack stand combination useful for the home garage.
You could also use the jack for framing and floor joint work if needed. The height range for the Powerbuild All-in-One jack is listed as 11 inches to 21 inches.
Some users have had trouble releasing the safety latch once engaged. To disengage the safety latch, raise the jack and lift the latch while lowering the jack back down. If you plan on using this jack for a compact vehicle, you will probably find that it is too tall. Consider purchasing a smaller jack/jack stand for your small vehicles. For routine oil changes and tire removal, this jack/ jack stand set will get the job done for you.
The Powerzone three-ton jack stand set is constructed using a heavy-duty steel frame and a wide base to ensure stability under l
oad. These jack stands are equipped with a ratchet locking bar for easy multi-position height adjustment.
Keep in mind that jack stands are only stands and are not able to raise or lower vehicles. Once you’ve raised the vehicle to the desired height, you slide the stands underneath to prevent the car from crushing you in the event that the jack fails.
The jack stands by Powerzone are rated for 3,000 pounds each for a combined total of 6,000 pounds. If you only intend to jack up one side of your vehicle, you should have no trouble with support.
If you intend to have the entire vehicle lifted off the ground, be sure that your stands are rated to support the weight before you get under the vehicle.
A little bit of chipped paint or a scratch or two won’t hurt the integrity of this jack stand. Before use, make sure that there are no rusty or broken parts. These stands will hold the vehicle high enough for you to accomplish what you need to do with plenty of elbow room. Be sure to read and follow the directions to ensure a safe experience.
For a more secure surface, consider using rubber jack stand pads from your local auto body shop to prevent slipping.
ESCO’s three-ton jack stands are U.S.A.-built and solid. These jack stands have a range from 13 inches to 21 inches. While the welds may not be the prettiest in the world, they are more than sufficient to get the job done.
Reviewers have commented on how sturdy these stands feel compared to other stands. They offer plenty of work space and hold the vehicle steady. These durable stands can hold 6,000 pounds each.
The solid base of these jack stands is nice and wide, making them ideal for those who want a little extra peace of mind. Keep in mind that the height of these stands may make it a little difficult to get it under a sedan-sized vehicle.
Related: Replacing A Catalytic Converter
The Stingers are made with a steel base for added durability. The self-locking ratchet handle will not release while under load, making these stands extremely safe. The double-baked enamel resists corrosion for a decrease in the likelihood of rusting.
The height range for these stands is listed as 12 inches to 17 11/16 inches. While these stands are more expensive than others, they are well worth it in terms of strength.
Reviewers have commented on how sturdy they feel compared to other three-ton jack stands. The welds for these stands are sturdy for many hours of work. As with all other jack stands, be sure to use these on a firm and level surface to prevent nasty accidents.
The V-shaped slot where the frame of the vehicle rests on the stand is a bit narrow. You will need to use precision when situating the vehicle on the stands before removing the jack. Other than that, you should have no trouble using these stands for your vehicle.
How to Use Jack Stands Properly
In order to ensure your safety, you will need to know how to properly jack your vehicle and how to safely use your jack stands. You can save a good deal of money by doing your own repairs and maintenance. Before you begin, you will need to park your vehicle on a flat concrete surface. If you use asphalt, place your jack stands on plywood.
Next, you will need to determine where to place your stands once the vehicle is jacked up. Trucks and most SUVs have steel frames supporting the weight of the vehicle. Cars, on the other hand, feature uni-body construction without a frame. Check your owner’s manual for the appropriate points of support for your jack and jack stands.
Before you crawl under your vehicle, check to ensure that the jack stands are steady by shaking the vehicle. Evaluate and fix any wobbly areas before beginning your repairs. If you are planning to change your tires, loosen the lug nuts while the vehicle is still on the ground. That way, the tires won’t be spinning while you try to turn the lug wrench.
To ensure your safety, don’t ever use the scissor jack that comes with your car for anything other than changing tires. Anything that requires you to get underneath the vehicle requires the use of jack stands. Be sure to use wheel chocks for the wheels you are not raising off the ground.
Tips: Stay Safe and Get the Job Done
- Never, ever, ever use anything other than jack stands to support the weight of your vehicle while you are working underneath it.
- A floor jack is only as effective as the rubber seals maintaining the hydraulic pressure. Should one of those seals fail, the jack will cease to support your vehicle. If you are underneath when that happens, you could find yourself in a very tight spot.
- The only appropriate place to use jack stands is on pavement, not asphalt. If you don’t have a concrete surface, consider using plywood underneath the jack stands to prevent them from sinking into the asphalt. On a hot day, a jack stand can very quickly sink into the asphalt, leaving a nice little hole when you remove it from under the car.
- Oh, and one other thing. If you are doing anything requiring a flame such as welding, keep a fire extinguisher handy nearby. A cheap fire extinguisher can help prevent the loss of an expensive vehicle.
Well, I hope you enjoyed this list of jack stands. The importance of using jack stands cannot be underestimated. We will perhaps never know how many lives were saved by these simple tools. Please leave your comments below. If you liked this article, feel free to share it with family and friends.