Bottle Jack VS Floor Jack

Share

Bottle Jack Vs Floor Jack: What’s the Difference?

Whether you wan to save money changing your own oil or just need a secure, reliable way to jack up your vehicle, having your own jack can be very convenient.

It can be challenging to decide whether a bottle jack or a floor jack is right for you and your situation.

You have to fully understand the difference between the two in order to make an informed decision, and this article will outline the important differences between these two popular types of jacks.

Related: Top 3: Whats The Best Floor Jack Under 200

What Is A Floor Jack?

A floor jack is a jack that rests on the floor beneath your vehicle. It is hydraulically operated and has two main parts: a piston pump that operated by hand, and a cylinder assembly.

In general, a floor jack will allow you to lift the vehicle to a greater vertical height than a bottle jack can. To operate a floor jack, the hand-operated pump, which looks a lot like a long handle, is pulled forward and turned.

Turning it opens up a valve, which allows hydraulic fluid to enter the cylinder assembly. This then lifts the vehicle upwards.

Floor jacks come in two standard sizes: a larger, approximately 200-pound model that can lift between four and 10 tons, and a smaller model that can lift 1.5 tons.

While these sizes are standard, there is a large selection of “mini jacks” available. These jacks can lift various weights, and they are generally more compact.

What Is A Bottle Jack?

Now that you know what a floor jack is, you may be wondering about the uses of a bottle jack vs floor jack. One advantage of bottle jack use is the fact that bottle jacks can generally lift up more weight than a floor jack.

If you use a bottle jack, you will need more ground clearance than you would with a floor jack, since floor jacks start lower to the ground. because bottle jacks are more compact, they are a good choice for those who want to replace the manufacturer-provided jacks that come with their vehicles.

To use a bottle jack, you must first place the jack under the vehicle. Then, you must turn the small piston counterclockwise to adjust the height of the piston. Once you have done that, you will need to locate the valve toward the bottom of the jack.

The handle assembly has a key at the top, which is designed to let you open the valve. You will need to turn this until it’s tight, and then place the handle into the shaft. With a pumping action, you will now be able to gradually raise your vehicle.

Related: Whats The Best Floor Jack Under $100?

Which Jack Type Is Right For You?

Which jack you choose will largely depend on your needs, as the bottle jack vs floor jack question will have a different answer for each person. The ease of use for each one is comparable, as both operate using a hydraulic mechanism.

Those who prefer floor jacks often like them because they are more stable. This is because, since they are larger, they distribute the weight of the vehicle over a larger area and make it less likely that the vehicle will fall off the jack.

Some models have wheels, which will allow the jack to move with the vehicle instead of allowing the vehicle to fall. This feature is especially helpful if you will need to be under your vehicle.

Floor jacks do tend to be larger and heavier than bottle jacks, so they are not ideal as portable jacks. If you intend to work on vehicles in your garage or driveway, a floor jack is a good choice.

Bottle jacks can lift more weight than floor jacks, but they require more ground clearance. This makes them a good choice for those who drive trucks, as trucks tend to be heavier and are generally not low to the ground.

Because they are smaller than floor jacks, the car weight is distributed over a smaller area, and the raised vehicle is less stable. For this reason, it is generally not advisable to be under your vehicle while it is raised on a bottle jack.

If you want something that will let you raise up your vehicle quickly to change a tire, a bottle jack is an excellent choice. It is significantly faster than manufacturer-provided jacks, and it is very likely of higher quality. The small size of the bottle jack makes it much more portable.

Related: 7 of The Best Jack Stands Reviews (Safety and Quality Required)

In conclusion, you choice of jack will depend largely on its intended purpose, the type of vehicle you drive, and whether you want a jack to keep in the garage or a portable jack.

Many people like have one of each: a floor jack for home use, and a bottle jack for emergency use on the road. If you have any questions, please comment below! There is also a summary listing of steps to take as you decide what type of jack to buy:

  • Step 1: Familiarize yourself with each type of jack. It may be helpful to watch instructional videos to get a sense of what goes into operating each.
  • Step 2: Decide what you need to use the jack for.
  • Step 3: Consider what type of vehicle you drive and whether one type of jack is better suited to that vehicle.
  • Step 4: Set a budget and evaluate different options.

Related: Check the 12 Volt Tire Inflator Reviews

(3 votes, average: 5.00 out of 5)
Loading...

AutoUpdates

The newest gear, techniques, & advice delivered to your inbox.

Latest in Performance